roloFlash is typically used with an SD card. This offers you the following advantages:
We recommend the following procedure:
When you connect the SD card to your PC, you can choose a suitable template for your controller from a supplied subfolder and copy it to the root directory of the SD card. This file is called RUN_V07.BAS.
Then, adjust the exact type according to the designations in the manual.
Copy your file to be flashed onto the SD card and, if necessary, rename it so that it conforms to the 8.3 format (e.g., NAME5678.HEX).
Enter this name into the RUN_V07.BAS file and run the compiler using the file compile_V07.bat. This will generate the file RUN_V07.BIN.
You can now insert the SD card into the roloFlash and verify the flashing process.
Hand over the roloFlash to the people who will work on your target devices. They do not need to be familiar with the details.
They only need to connect the roloFlash and wait until the green activity light stops. After that, LED 5 will stay green. If an error occurs, a red error pattern will appear.
